show ip ssh
Syntax
Mode
Report Fields
sshcon maxsessions
Command
History
sshcon timeout
Command
History
Hypertext Transfer Protocol (HTTP) Commands
|
Security Commands
212
This command displays the ssh settings.
show ip ssh
Privileged Exec
Administrative Mode—This field indicates whether the administrative mode of SSH is enabled or
disabled.
Protocol Levels—The protocol level may have the values of version 1, version 2 or both versions 1 and
version 2.
Connections—This field specifies the current ssh connections.
SSH Sessions Currently Active
Max SSH Sessions Allowed
SSH Timeout—SSH login timeout configured by
Version 2.3
Replaced by
Version 2.3
Replaced by
Note: The SFTOS Web UI is not supported in SFTOS v. 2.5.1 or 2.5.2, and the
commands in this section were designed primarily to support the Web UI.
The commands in this section are:
•
ip http javamode enable on page 213
•
ip http secure-port on page 213
•
ip http secure-protocol on page 213
•
ip http secure-server enable on page 214
•
ip http server enable on page 214
•
show ip http on page 215
This section provides a detailed explanation of the HTTP commands. The commands are divided into
the following groups:
ip ssh timeout
adunniu, GnEnnaeon
.
ip ssh timeout
.
command