Show Ip Ospf Virtual-Link Brief - Dell Force10 S2410-01-10GE-24P Command Reference Manual

show ip ospf virtual-link brief

Syntax
Mode
Report Fields
trapflags
Syntax
Default
Mode
Usage
Information
| OSPF Commands
448
This command displays the OSPF Virtual Interface information for all areas in the system.
show ip ospf virtual-link brief
Privileged Exec and User Exec
Area Id—Is the area ID of the requested OSPF area.
Neighbor—Is the neighbor interface of the OSPF virtual interface.
Hello Interval—Is the configured hello interval for the OSPF virtual interface.
Dead Interval—Is the configured dead interval for the OSPF virtual interface.
Retransmit Interval—Is the configured retransmit interval for the OSPF virtual interface.
Transit Delay—Is the configured transit delay for the OSPF virtual interface.
This command enables and disables OSPF traps.
[no] trapflags
The no trapflags command disables OSPF traps.
enabled
Router OSPF Config
Use this command in conjunction with other SNMP management commands, described in
Management Commands on page 77.
SNMP