Show Ip Vrrp Interface Stats - Dell Force10 S2410-01-10GE-24P Command Reference Manual

interface vlan
ip vrrp <vrID>

show ip vrrp interface stats

This command displays the statistical information about each virtual router configured on the SFTOS
switch.
show ip vrrp interface stats unit/slot/port vrID
Syntax
Mode Privileged Exec and User Exec
Is the time that the virtual router has been up, in days, hours, minutes and seconds.
State Transitioned to Master—Represents the total number of times virtual router state has changed to
Report Fields
MASTER.
Advertisement Received—Represents the total number of VRRP advertisements received by this virtual
router.
Advertisement Interval Errors—Represents the total number of VRRP advertisements received for
which advertisement interval is different than the configured value for this virtual router.
Authentication Failure—Represents the total number of VRRP packets received that don't pass the
authentication check.
IP TTL errors—Represents the total number of VRRP packets received by the virtual router with IP TTL
(time to live) not equal to 255.
Zero Priority Packets Received—Represents the total number of VRRP packets received by virtual
router with a priority of '0'.
Zero Priority Packets Sent—Represents the total number of VRRP packets sent by the virtual router
with a priority of '0'.
Invalid Type Packets Received—Represents the total number of VRRP packets received by the virtual
router with invalid 'type' field.
Address List Errors—Represents the total number of VRRP packets received for which address list
does not match the locally configured list for the virtual router.
Invalid Authentication Type—Represents the total number of VRRP packets received with unknown
authentication type.
Authentication Type Mismatch—Represents the total number of VRRP advertisements received for
which 'auth type' not equal to locally configured one for this virtual router.
Packet Length Errors—Represents the total number of VRRP packets received with packet length less
than length of VRRP header
Creates a VLAN and assigns it an ID, and then enters the Interface VLAN mode, which
provides access to VLAN configuration commands for the specified VLAN.
Sets the VRID (virtual router ID) on an interface for virtual router configuration in the
router. This command also has options.
Routing Commands | 419