Vlan Protocol Group Add Protocol; Vlan Protocol Group Remove; Vlan Pvid - Dell Force10 S2410-01-10GE-24P Command Reference Manual

vlan protocol group add protocol

Syntax
Default
Mode
Command
History
Related
Commands

vlan protocol group remove

Syntax
Mode
Command
History
Related
Commands

vlan pvid

| VLAN Commands
146
This command adds the named protocol to the protocol-based VLAN identified by groupid. A group
may have more than one protocol associated with it. Each interface and protocol combination can only
be associated with one group. If adding a protocol to a group causes any conflicts with interfaces
currently associated with the group, this command will fail and the protocol will not be added to the
group. The possible values for protocol are ip, arp, and ipx.
The no version of this command removes the protocol from this protocol-based VLAN group that is
identified by this groupid. The possible values for protocol are ip, arp, and ipx.
[no] vlan protocol group add protocol groupid protocol
None
Global Config
Version 2.5.2
Version 2.5.1
vlan protocol group Adds a protocol-based VLAN group to the system.
vlan protocol group
Remove the protocol-based VLAN group that is identified by the
remove
protocol group Attach a group ID to the selected VLAN.
This command removes the protocol-based VLAN group that is identified by the
vlan protocol group remove
Global Config
Version 2.5.2
Version 2.5.1
vlan protocol group Adds a protocol-based VLAN group to the system.
vlan protocol group Add the named protocol to the protocol-based VLAN identified by
add protocol
protocol group Attach a group ID to the selected VLAN.
This command changes the VLAN ID per interface.
The no version of this command sets the VLAN ID per interface to 1.
Unsupported: not tested in 2.5.2
Unsupported: not tested in 2.5.1
groupid
Unsupported: not tested in 2.5.2
Unsupported: not tested in 2.5.1
groupid
.
groupid .
groupid
.