Delete (Software Image); Filedescr (Software Image) - Dell Force10 S2410-01-10GE-24P Command Reference Manual

Related
Commands

delete (software image)

Syntax
Parameters
Default
Mode
Command
History
Related
Commands

filedescr (software image)

Syntax
Parameters
Default
Mode
| System Configuration Commands
120
copy Download files to the switch, or upload files from the switch.
update bootcode Activate the specified software image for subsequent reboots.
show bootvar Display version information and activation status for the current active and backup
images.
This command deletes the designated image file from permanent storage on the switch.
delete [ ] {image1 | image2}
unit
unit
image1 image2
|
all units in the stack
Privileged Exec
Version 2.5.1 Introduced
update bootcode Activate the specified software image for subsequent reboots.
show bootvar Display version information and activation status for the current active and backup
images.
This command associates a given text description with an image. Any existing description is replaced.
filedescr [ ] {image1 | image2}
unit
unit
image1 image2
|
text-description
all units in the stack
Privileged Exec
(OPTIONAL) This parameter is valid only on stacks. An error is returned if a
number is entered on a standalone system. In a stack, the parameter identifies the
stack member on which this command must be executed. Default: all units in the
stack
Identify the software image to delete. The image to be deleted must be a backup
image. If this image is the active image, or if this image is activated, the CLI
displays an error.
text-description
(OPTIONAL) For stacking, this parameter identifies the node on which this
command must be executed. When this parameter is not supplied, the command is
executed on all nodes in the stack.
Default: all units in the stack
Identify the software image to associate with the given text description.
Enter a text description for the selected software image.