Continue Printing When Toner Is Out
You can set whether the machine continues printing received documents and
reports when it is running out of toner. If you set the machine not to continue
printing, the machine stops printing when the toner starts to run low, and
automatically stores the received documents in memory.
NOTE
•
When the machine starts to run out of toner, the message <Prepare the toner.> appears
on the display.
•
The default setting is 'Yes'.
1
7
2
7-48
Continue Printing When Toner Is Out
(Additional Functions) ➞ [Communications Settings]
Press
➞ [RX Settings] under <Common Settings>.
If necessary, see the screen shots in steps 1 and 2 of "Two-Sided Printing," on
p. 7-39.
Press [Continue Printing When Toner Is out].
NOTE
If the desired setting is not displayed, press [▼] or [▲] to scroll to the desired
setting.