Toner Runs Out; Specifying The Way Of Printing When Toner Runs Out - Canon imageCLASS D480 Basic Operation Manual

Specifying the Way of Printing When Toner Runs Out

Specifying the Way of Printing When Toner
Runs Out
This function enables you to continue printing received fax documents or reports when the
toner has run out.
The default setting is <OFF>.
When <CONT. PRINTING> is set to <ON>, the printed documents may be light or blurred because of lack of toner. The data is
erased when the documents are printed out, so you cannot print the same documents again.
1
Press [Menu].
2
Press [ ] or [
SETTINGS>, then press [OK].
M E N U
5 F A X
3
Press [ ] or [
SETTINGS>, then press [OK].
F A X S E T T I N G S
5 P R I N T E R
4
Press [ ] or [
PRINTING>, then press [OK].
P R I N T E R
3 C O N T .
5
Press [ ] or [
<ON>, then press [OK].
C O N T .
6
Press [Stop/Reset] to return to the
standby mode.
5-34
] to select <FAX
S E T T I N G S
] to select <PRINTER
S E T T I N G S
] to select <CONT.
S E T T I N G S
P R I N T I N G
] to select <OFF> or
P R I N T I N G
O F F