Available Paper Sizes - Canon imageCLASS MF7280 Sending Manual

Available Paper Sizes

When received documents are printed, they are printed from the paper drawer that
has the same size paper as the received document. If all of the settings in Select
Cassette in RX Settings under <Common Settings> in Communications Settings
(from the Additional Functions screen) are set to 'On', and paper of the correct size
is not available, the machine automatically selects a different paper size in the
following order. The paper size is automatically selected in the same order, even if
paper runs out during printing.
■ Available Paper Sizes for Received Documents
11" x 17" originals
5
LGL originals
LTR originals
STMT originals
* Received documents are automatically reduced before being printed on the paper size indicated.
IMPORTANT
Received documents can be printed on the following paper sizes and paper types:
- Paper Sizes: 11" x 17", LGL, LTR, LTRR, or STMTR
- Paper Types: plain or recycled
NOTE
• You can specify any paper drawer to receive fax/I-fax documents. The default setting is
'On', except for the stack bypass. (See Chapter 3, "Customizing Settings," in the
Reference Guide.)
• You can set the machine to reduce received documents by 75%, 90%, 95%, or 97% if the
document is larger than any of the available paper sizes. (See "Reducing a Received
Document," on p. 7-44.)
• You can change the order of paper selection. (See "Paper Drawer Selection," on p. 7-41.)
• You can set the machine to print received documents on both sides of the paper. (See
"Two-Sided Printing," on p. 7-39.)
•
Received documents are output face down, in the order in which the pages are received.
5-12

Available Paper Sizes

11" x 17" ➞ LGL ➞ STMTR x 2
*
LGL ➞ LTR x 2 ➞ STMTR x 2 ➞ 11" x 17"
LTR ➞ LGL ➞ STMTR x 2 ➞ 11" x 17"
STMTR ➞ LTR ➞ LGL ➞ 11" x 17"