Placing Originals; Document Sizes - Canon imageCLASS MF7280 Sending Manual

Placing Originals

Place your originals on the platen glass or into the feeder, depending on the size
and type of the original, and the send settings that you have specify.
■ Platen Glass
Place the originals on the platen glass when scanning bound originals (such as books and
magazines), heavy or lightweight originals, and transparencies.
■ Feeder
Place the originals into the feeder when you want to scan several originals at the same
time, and press
glass and scans them. Two-sided originals can also be automatically turned over and
scanned as two-sided documents.

Document Sizes

The size of the original is automatically detected, and the document is scanned. If
the output paper in the machine at the receiving end is not equal to the scanned
size, the original image may be reduced in size or divided into smaller parts before
it is sent.
The machine cannot always detect the size of the original if it is a nonstandard
paper size, such as a book. In this case, specify the size at which you want to scan
the original. (See "Document Size," on p. 3-9.)
(Start). The machine automatically feeds the originals to the platen
1-31

Placing Originals

1