Flow of Sending Operations
This section describes the flow of basic sending operations.
NOTE
•
Before using the Send function, it is useful to read the following topics:
- Main power and control panel power (See Chapter 1, "Before You Start Using This
Machine," in the Reference Guide.)
- Routine maintenance (See Chapter 6, "Routine Maintenance," in the Reference Guide.)
•
The maximum number of send jobs that the machine can handle is 95. However, the
actual number of send jobs that the machine can handle may be fewer than 95, if multiple
documents are being sent at the same time.
•
You can print a report that contains the results of all send jobs. (See "TX Report," on
p. 10-3.)
1
Press the appropriate keys in accordance with the messages
displayed on the touch panel display.
If there are no messages displayed, proceed to step 2.
● If the message <Enter the Department ID and Password using the
numeric keys.> appears:
❑
Press [Department ID] ➞ enter the Department ID using
❑
Press [Password] ➞ enter the password using
-
(numeric keys).
-
(numeric keys).
Flow of Sending Operations
1
1-19