NOTE
To cancel the scan settings, press the Scan Settings drop-down list ➞ press
•
[Option] ➞ [Cancel].
•
To cancel all settings and return the machine to the Standard mode, press
(Reset).
Two-Sided Originals
You can set the machine to automatically turn over two-sided originals that are
placed in the feeder, and scan each side separately.
IMPORTANT
When you are scanning originals with a horizontal (landscape) orientation, such as
LTRR, make sure to place them horizontally into the feeder. If these originals are placed
vertically, the back sides of these originals are scanned upside down.
1
Place your originals ➞ specify the destination.
NOTE
•
For instructions on placing your originals, see "Placing Originals," on p. 1-31.
•
For more information on specifying the destination, see Chapter 2, "Basic Sending
Methods."
2
Press the Scan Settings drop-down list ➞ press [Option].
If necessary, see the screen shot in step 2 of "Color," on p.3-5.
3
Press [Two-sided Original].
3-19
Scan Settings
3