Setting The Display Language; Selecting The Type Of Telephone Line - Canon imageCLASS MF7280 Sending Manual

• Date and Time
- The date and time of the transmission are recorded.
• I-Fax Address or Fax Number
- Your machine's I-fax address or fax number is recorded.
• Sender's Name (TTI (Transmit Terminal Identification))
- For fax documents, the name registered as the unit name is recorded.
1
• Destination Name
- If you send an original and select a destination from the Address Book, the stored
destination's name appears on the sending record. (See "Storing New Addresses," on
p. 8-5.)
• Page Number
- The current page number out of the total number of pages of the original is recorded.
NOTE
If the machine is set so that the sending record is printed at the top of the recording
paper, and not all of the items are registered, only the required registered items and the
total number of original pages are printed.

Setting the Display Language

If you decide to switch the display language, set the Language Switch in Common
Settings (from the Additional Functions screen) to 'On' before entering characters.
If Language Switch is set to 'Off', and then you set it to 'On' after entering
characters, the characters may not be displayed correctly. In this case, re-enter the
characters after setting Language Switch to 'On', or enter characters with
Language Switch set to 'Off'.

Selecting the Type of Telephone Line

Set the type of telephone line that is connected to the machine.
If you are not sure what type of telephone line you have, check with your local
telephone company. To operate the Fax function, you must know whether the
machine is connected to a touch-tone or rotary pulse telephone line. The machine
can be set to operate with either type of telephone line.
Be sure to check the type of telephone line you are using, and make the correct
setting. If this setting is incorrect, you will not be able to communicate with other
machines.
For instructions on setting the type of telephone line, see Chapter 1, "Introduction to
Fax Functions," in the Facsimile Guide.
NOTE
The default setting is 'Tone'.
1-10
Things You Must Do Before Using This Machine