Table of Contents
Advertisement
Blank areas appear at the bottom
of each page or on other pages,
with a small strip of text at the
top.
The printer will not send or
receive faxes.
An error often occurs during a fax
transmission or reception.
The printer receive faxes, but it
does not print.
You may have chosen the wrong paper settings in the user option setting.
See also:
• "Supported Print Media" on page 125
Ensure that the region code is set correctly under
Fax Settings → Region.
Check the Dialing Type for PB, DP(10PPS) or DP(20PPS).
Check that the cables are connected properly.
If the telephone line cord is connected to the printer via any device such as an
answering machine and a computer, remove the device and directly connect the
telephone line cord to the printer.
Reduce the modem speed under
→ Modem Speed.
Check the toner level.
Ensure that there is paper in the paper tray.
Ensure that Sent Fax Fwd is set to Off.
Ensure that Junk Fax Filter is set to Off.
Ensure that SecureReceiveSet is set to disabled.
Execute Initialize NVM.
(System) → Admin Menu →
(System) → Admin Menu → Fax Settings
Troubleshooting
361
Hide quick links:
Advertisement
Table of Contents
