Fuji Xerox DocuPrint M355 df User Manual page 19

Locate this product in a well-ventilated area. Do not obstruct ventilation openings of the product.
Keep the minimum clearance as follows for ventilation and an access to the power plug. Unplug the
product if an abnormal condition is noted.
930 mm
903 mm
Do not incline the product at more than 10 degree angle. Otherwise, it may fall over and cause
injuries.
To bundle wires and cables, always use the cable ties and spiral tubes that Fuji Xerox supplies.
Otherwise, it may cause some defects.
Others
To keep this product in a good performance and condition, always use it in the following
environment:
• Temperature: 10 - 32 °C
• Humidity: 10 - 85%
When the product is left in a chilly room and the room is rapidly warmed up by heater, dew
condensation may form inside the product and cause a partial deletion on printing.
110 mm
400 mm
430 mm
100 mm
600 mm 426 mm
110 mm
600 mm 426 mm
Right Left
10°
Front Back
10°
400 mm
400 mm
503 mm
400 mm
Right Left
10°
Front Back
10°
19
Safety Notes