Fuji Xerox DocuPrint M355 df User Manual page 370

031-585 Press the
server access rights.
031-587
031-588 Press the
storage location has free space.
031-590 Press the
than "Cancel" for processing in the case of file name duplication, or change/delete file name the same
as the one specified in sending destination folder.
031-594 Press the
than "Cancel" for processing in the case of file name duplication, or change/delete file name the same
031-595
as the one specified in sending destination folder.
031-598 Press the
append access right to the file and if server supports the FTP append command.
031-599 Press the
rename access right to the file. Check if server supports the FTP rename command.
033-513 Press the
following:
NOTE:
•
033-762 Press the
rejects faxes sent from unwanted numbers.
See also:
• "Junk Fax Filter" on page 270
033-788 Press the
following:
NOTE:
•
034-515 Press the
following:
034-791 Press the
the telephone line cord is connected properly. If the line connection is correct, check the following:
NOTE:
•
If tone/pulse setting is correct, check the following:
035-701 Press the
following:
NOTE:
•
035-702 Press the
same operation.
370
Troubleshooting
button, or wait for the time set in Fault Time-out for the printer to recover. Check
button, or wait for the time set in Fault Time-out for the printer to recover. Check if
button, or wait for the time set in Fault Time-out for the printer to recover. Set other
button, or wait for the time set in Fault Time-out for the printer to recover. Set other
button, or wait for the time set in Fault Time-out for the printer to recover. Check
button, or wait for the time set in Fault Time-out for the printer to recover. Check
button, or wait for the time set in Fault Time-out for the printer to recover. Try the
• Print the received fax, or wait for a while until sending a fax is completed.
• Print the fax job stored using the Secure Receive feature.
For more information on the Secure Receive feature, see
.
page 243
button, or wait for the time set in Fault Time-out for the printer to recover. The printer
button, or wait for the time set in Fault Time-out for the printer to recover. Try the
• Remove the received fax, or wait for a while until sending a fax is completed.
• Print the fax job stored using the Secure Receive feature.
For more information on the Secure Receive feature, see
.
page 243
button, or wait for the time set in Fault Time-out for the printer to recover. Try the
• Try the same operation.
• Check the printer or remote machine if the memory is full.
button, or wait for the time set in Fault Time-out for the printer to recover. Check if
• If tone/pulse setting is correct.
For more information on tone/pulse setting, see
• If the remote machine can receive a fax.
button, or wait for the time set in Fault Time-out for the printer to recover. Check the
• status of the remote machine
• tone/pulse setting
For more information on tone/pulse setting, see
button, or wait for the time set in Fault Time-out for the printer to recover. Try the
"Using the Secure Receiving Mode" on
"Using the Secure Receiving Mode" on
"Dialing Type" on page 269
"Dialing Type" on page 269
.
.