Fuji Xerox DocuPrint M355 df User Manual page 186

5
Select your scanning preferences and click Adjust the quality of the scanned picture to display the
Advanced Properties dialog box.
6
Select the desired properties including brightness and contrast, and then click OK.
7
Click Scan to start scanning.
8
Click Save from the Paint menu.
9
Enter a picture name, and select a file format and destination to save the picture.
To Scan an Image From Control Panel
NOTE:
• This feature is supported on Windows Server 2003 and Windows XP only.
1
Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass, and close the document cover.
See also:
• "Making Copies From the DADF" on page 169
• "Making Copies From the Document Glass" on page 167
2
Click start Control Panel
→
3
Double-click the scanner icon.
The Scanner and Camera Wizard launches.
4
Click Next to display the Choose Scanning Preferences page.
NOTE:
• The screen image may vary depending on the operating system.
5
Select your desired type of picture, paper source, and paper size, and click Next.
6
Enter a picture name, select a file format, and specify the desired location to save the scanned document.
7
Click Next to start scanning.
8
Follow the on-screen instructions to edit the picture after it is copied to your computer.
186
Scanning
Printers and Other Hardware
→
Scanners and Cameras.
→