Fuji Xerox DocuPrint M355 df User Manual page 298

• Sharpness
Purpose:
To set the default sharpness level.
Values:
Sharper
Normal*
Softer
• Contrast
Purpose:
To adjust the amount of colors to make the contrast of colors darker or lighter than the original.
Values:
Higher
Normal*
Lower
• Auto Exposure
Purpose:
To suppress the background of the original to enhance text on the scanned image.
Values:
Off
On*
• Auto Expo. Level
Purpose:
To specify the default background suppression level.
Values:
*
Normal
Higher(1)
Higher(2)
• Margin Top/Bottom
Purpose:
To specify the value of the top and bottom margins.
Values:
2 mm*/0.1 inch*
0 - 50 mm/0.0 - 2.0 inch
298
Using the Operator Panel Menus and Keypad
Makes the scanned image sharper than the original.
Does not make the scanned image sharper or softer than the original.
Makes the scanned image softer than the original.
Adjusts the amount of colors to make the contrast of colors darker
than the original.
Does not adjust the amount of colors to make the contrast of colors
darker or lighter than the original.
Adjusts the amount of colors to make the contrast of colors lighter
than the original.
Does not suppress the background.
Suppresses the background of the original to enhance text on the
scanned image.
Sets the background suppression level to Normal.
Sets the background suppression level to Higher(1).
Sets the background suppression level to Higher(2).
Specify the value in increments of 1 mm/0.1 inch.