Fuji Xerox DocuPrint M355 df User Manual page 401

Checking the Printer Status with E-mail
This section describes cautions when sending e-mail to the printer to check the printer status.
• You can specify any title for the e-mail when checking the printer status or changing the printer settings.
• Use the commands described in the next section to create the text of the e-mail.
• Commands That Can Be Used in E-mail Text
Use each command according to the following rules:
• Prefix all commands with "#", and specify the #Password command at the top of the e-mail.
• Command lines without "#" are ignored.
• Write one command on each line and separate each command and parameter with a space or a tab.
When the same command is written two or more times in one e-mail, the second and subsequent commands are
ignored.
Command
#Password
#NetworkInfo
#Status
• Example of Commands
• When the read only password is "ronly", and to check the printer status:
#Password ronly
#Status
#NetworkInfo
Parameter Description
Password Use this command at the top of the e-mail when a
password for read only is set. You can omit this
command when the password is not set.
Set this when you want to check information on the
network settings list.
Set this when you want to check the printer status.
401
Maintenance