Fuji Xerox DocuPrint M355 df User Manual page 368

016-750 Press the
016-753
016-755
016-757
016-758
016-759
016-764 Press the
SMTP server administrator.
016-765
016-766
016-767 Press the
e-mail address, and try scanning again.
016-768
016-786 Press the
the network cable is connected properly. If there is no problem with the network cable, contact server
016-790
administrator.
016-791 Press the
016-799 Press the
016-930 The device is not supported. Remove it from the USB port.
016-931 The USB hub is not supported. Remove it from the USB port.
016-985 Press the
scanning by lowering the resolution setting or changing the file format of the scanned image.
016-986
026-720 Press the
026-721 Check your USB storage device:
027-446 Change IP address to avoid duplication. Turn off the printer, and turn it on again.
027-452
031-521 Press the
login-able computer with your system administrator.
031-522 Press the
login name (domain name and user name) and password are correct.
031-523 Press the
share name you specified.
031-524 Press the
number of users who use the server at the same time is not exceeding the upper limit.
031-525 Press the
the specified user can read and write file at the storage location.
031-526 Press the
DNS connection, or check if forwarding destination server is registered with DNS.
031-527 Press the
address, or set forwarding destination server address as IP address.
031-528 Press the
the printer can communicate via network with the forwarding destination SMB server. For example,
check the following:
For communication beyond the subnet, contact your system administrator.
031-529 Press the
password is correct.
031-530 Press the
storage location is correct. Storage location you specified is DFS setting, and check if it is linked to
other server. Specify directly linked server, share name, and storage location.
031-531 Press the
access right of the folder you specified.
368
Troubleshooting
button, or wait for the time set in Fault Time-out for the printer to recover.
button, or wait for the time set in Fault Time-out for the printer to recover. Contact
button, or wait for the time set in Fault Time-out for the printer to recover. Check
button, or wait for the time set in Fault Time-out for the printer to recover. Check if
button, or wait for the time set in Fault Time-out for the printer to recover.
button, or wait for the time set in Fault Time-out for the printer to recover.
button, or wait for the time set in Fault Time-out for the printer to recover. Retry
button, or wait for the time set in Fault Time-out for the printer to recover.
• If the file size or the number of files exceeds the limit of your USB storage device.
• If your USB storage device is write-protected.
button, or wait for the time set in Fault Time-out for the printer to recover. Confirm
button, or wait for the time set in Fault Time-out for the printer to recover. Check if
button, or wait for the time set in Fault Time-out for the printer to recover. Check the
button, or wait for the time set in Fault Time-out for the printer to recover. Check the
button, or wait for the time set in Fault Time-out for the printer to recover. Check if
button, or wait for the time set in Fault Time-out for the printer to recover. Check
button, or wait for the time set in Fault Time-out for the printer to recover. Set DNS
button, or wait for the time set in Fault Time-out for the printer to recover. Check if
• Connection of a network cable
• TCP/IP setting
• Communication with Port 137 (UDP), 138 (UDP), and 139 (TCP).
button, or wait for the time set in Fault Time-out for the printer to recover. Check if
button, or wait for the time set in Fault Time-out for the printer to recover. Check if
button, or wait for the time set in Fault Time-out for the printer to recover. Check