Configure Before Scan - Xerox DocuMate 3125 User Manual

Scanning and Configuring One Touch
2. Right-click on the text format icon.
The menu options depend on the type of Destination Application you select.
Example menu for the Text format when
the selected application is Microsoft's
Word and the OneTouch OmniPage
Module is installed.
3. Choose the file type that you want for the text format.
4. Click OK or Apply on the One Touch Properties window.

Configure Before Scan

You can set up the scanner so that, when you press a button or click it on the Button Panel, a
different scanning interface opens before the scanning starts. You can then use the interface to
change the Resolution, Scan Mode, and other settings. When you scan, the scanned image will
still be sent as the file type and to the same Destination Application already selected in the
One Touch Properties window for that button.
1. Open the One Touch Properties window.
User's Guide
Xerox
Example menu for the Text format when
the selected application is Transfer to
Storage and the OneTouch OmniPage
Module is installed.
® ®
DocuMate 3125
6-44