Document Size - Xerox DocuMate 3125 User Manual

® ®
Scanning from TWAIN and WIA Xerox DocuMate 3125

Document Size

Standard document sizes
Click the drop down menu and select a pre-defined document size from the list. The available
document sizes are within the scanner's range of minimum and maximum item size.
Custom document sizes
Select the measurement units you want to use from the Units list.
If the Document size list does not include the document size for your scanning batch, click in
one of the fields below the document size list. Input the width of the document in the first field,
then input the height in the second field.
You can input a maximum of 17 inches in the height field. Please refer to Long Document if your
scanner supports page lengths greater than 17 inches and you want to scan long pages.
You can only specify values within the scanner's minimum and maximum supported item size.
Please refer to the maintenance section of the scanner user's guide for this information.
Long Document
Select Long document to enable support of paper sizes up to the scanner maximum. After you
select this option make sure you input the page length for your document in the custom input
field, located below the Document size selection list. If the value in the custom field is less than
the actual document length, the scanned page will be split across multiple images. For example,
if you are scanning a document that is 22 inches long, and the field is set to 11 inches, the final
scan will be split across 2 images.
Note that some of the options in the scanner interface cannot be used when the page length
will be greater than 17 inches. When you select this option, incompatible options will either be
automatically disabled or the setting will simply be discarded while scanning. For instance, the
option Detect double feeds will usually be disabled when Long document is selected, even if
the scanner supports DFD, as the added page length will cause a false double feed.
User's Guide 7-126