Selecting Options For One Touch - Xerox DocuMate 3125 User Manual

® ®
Xerox DocuMate 3125
7. Select a scanning configuration in the Select configuration list.
The configuration's basic settings include: scanning mode, resolution (dpi), page size,
brightness (Br), and contrast (Cr). To see a selected scan configuration's settings, click its
icon. Click the icon again to close the detailed information. Refer to
page 32 and Configure Before Scan
scan configurations.
8. Click on OK to save the changes.
9. Place an item in the scanner and click the One Touch button to start scanning.
The scanner scans and sends the image to the selected destination, with the file format and
scan configuration you specified.
Properties button—displays a window for selecting properties for a destination. This button is
disabled if the selected destination application does not have global configuration properties.
Refresh button—updates the links between all your computer's Destination Applications and
One Touch. If you install new software that can be used as a Destination Application, click the
Refresh button to link the new software to One Touch.
New/Copy/Edit/Delete buttons—click New or Copy to add new scan configurations to the list.
Click Edit or Delete to change or remove them.
OK/Cancel/Apply buttons—OK accepts any changes and closes the window. Apply accepts any
changes but leaves the window open so you can continue making additional changes. Cancel
closes the window without accepting any changes.

Selecting Options for One Touch

Use the Options tab to configure how One Touch works with the selected button, such as which
destinations are available, or what the file name should be.
6-29
Scanning and Configuring One Touch
on page 44 for instructions on creating and modifying
Scan Configurations on
User's Guide