Device Settings - Xerox DocuMate 3125 User Manual

® ®
Xerox DocuMate 3125

Device Settings

Scanner Details
• Firmware version—this is the current hardware processor chip version number.
• Serial number—the scanner's unique identification number.
• LLD version—the scanner's base driver version. This is not the One Touch software revision,
TWAIN or WIA driver versions.
• Driver version—this is the version of the scanner's TWAIN driver.
Power Settings
• Sleep mode—sleep mode is the low-power state when the scanner is not in use. You can
adjust the amount of time you want the scanner to wait before it goes into low power.
Click the green enter button to save any changes in the Sleep mode field.
Click the red reset button to reset to the default timeout value.
Click the Sleep button to immediately put the scanner into low power mode. Click the
Wake button to bring the scanner out of low power mode.
• Turn lamp on and Turn lamp off—click either of these buttons to immediately turn the
scanner lamp on or off.
• Reset device—click this button to revert the scanner hardware back to the scanner's
firmware defaults. As this option resets the scanner hardware, you will not see a change in
the interface unless the power save time has been changed. Clicking this button includes
returning the power save time-out to the default setting.
7-145
Scanning from TWAIN and WIA
User's Guide