Setting Custom Paper Sizes - Xerox DocuPrint 305 User Manual

3.3

Setting Custom Paper Sizes

When printing on custom size paper, register the paper size in the printer driver.
Setting on the control panel is also required to print custom size paper loaded in trays 1 to 4.
This section explains how to configure the size on the control panel.
For details on registration on the printer driver, refer to "Setting Custom Paper Sizes"
(P. 29).
Important
• When setting the paper size on the printer driver and control panel, be sure to specify the same size as
the actual paper used. Setting the wrong size for printing will cause machine failure. This is especially
true if you configure a bigger size when using a narrow width paper.
Note
• When loading custom size paper in the bypass tray (optional), it is not necessary to specify the size on
the control panel.
• To return to standard paper size settings, select [Auto] in step 6 below. This printer will automatically
detect the size and orientation of the loaded paper.
1. Press the <Menu> button to display the [Menu] screen.
2. Press the < > or < > button until [Admin Menu] is displayed, then press the < >
button.
3. Press the < > or < > button until [Printer Settings] is displayed, then press the < >
button.
4. Press the < > or < > button until [Paper Size] is displayed, then press the < >
button.
5. Press the < > or < > button until the required tray is displayed, then press the < >
button.
6. Press the < > button to display [Custom], then press the <Eject/Set> button.
7. Press the < > or < > button to display [Portrait (Y) Size] or [Landscape (X) Size],
then press the < > button.
Enter values for the paper size to be used by pressing the < > or < > button.
8. Press the <Eject/Set> button.
9. Press the <Menu> button.

3.3 Setting Custom Paper Sizes

63