Xerox DocuPrint 305 User Manual page 142

1. Pull the paper tray out of the printer.
2. While pushing the retard part (see right
diagram) down (1), widen the tab on the
feed roll to loosen it (2) and then slowly
remove the feed roll from the shaft of the
paper tray (3).
3. Wipe the rubber parts with a wet but
well-wrung soft cloth.
4. Turn the short tab of the feed roll to the right
and slowly push it onto the shaft of the
paper tray.
By aligning the slot of the feed roll with that
of the shaft, push the feed roll completely in
so that the short tab fits into the slot of the
shaft.
5. Push the paper tray completely into the printer.
142
6 Daily Care
Short tab