Print Area; Banner Sheet; Secure Print - Xerox DocuPrint 305 User Manual

Sleep Mode Timer
Specify the transitional time to sleep mode between 5 and 30 minutes in increments of 1
minute. Once the power saver mode is turned on, the display of the control panel is turned
off and the lamp of the <Power Saver> button is lit. The default is [10 Mins].
Refer to
• "Example: Changing the Low Power/Sleep Mode Settings" (P. 68)
Auto Job History
Specifies whether to automatically print information about the printed data that has been
processed in the printer ( [Job History Report] ).
[Do not print] (default)
Select this if you do not want to print the [Job History Report] automatically.
[Print]
Select this to print a report on the oldest 50 data histories that have not been output yet
when the memory capacity is full. This does not include the print data in processing or in
queue.
2 Sided Report
Specifies whether to print reports/lists on 1 side or 2 sides of the paper when the 2 sided
printing function is available in the printer.
[1 Sided] (default)
[2 Sided]

Print Area

Specfies whether to expand the printable area. The default is [Normal].

Banner Sheet

Banner Output
Specifies whether to output the banner sheet. If you want to output it, specify whether to
output it at the beginning of, at the end of, or at the beginning and end of the document.
Banner Tray
Specifies the tray from which the banner sheet is output from trays 1 to 4.

Secure Print

Specifies whether to use the secure print feature.
[Enable] (default)
Select this to use the secure print feature.
[Disable]
Select this to prohibit secure print.
Note
• This item is displayed when the hard disk (optional) is installed.
Machine Clock
Specifies the date (day/month/year) (for year, enter a number between 2000 and 2099) and
time (hour/minute) (for hours, enter a number in 24-hour format) of the printer system clock.
The date/time specified here will be printed on reports and lists.
Set Date
Enter the date in the format of "dd/mm/yy" (e.g. 01/01/2002).
88
4 Settings on the Control Panel
*3 (refer to P. 95)
*3 (refer to P. 95)