Printing On Transparencies; Loading Transparencies - Xerox DocuPrint 305 User Manual

2.3

Printing on Transparencies

Loading Transparencies

Load transparencies in trays 1 to 4 or the bypass tray (optional).
Important
• Transparencies with white frame and full-color transparencies cannot be used.
Loading Transparencies in a Paper Tray
The way to load transparencies in the paper tray the same as the way to load standard size
paper. For details, refer to "3.2 Loading Paper" (P. 59).
You must also paper type for the paper tray in [Transparency] on the control panel.
Refer to "3.4 Setting Paper Types" (P. 64) to change the setting.
Load the Transparencies Into Bypass Tray
1. After carefully fanning a small stack of
transparencies load them into the tray with
the side to be printed facing up. Load
transparencies a few at a time.
2. Slide the paper guides to the size of the transparencies.
3. Set the paper size indicator to the size of the transparencies.
Printing on Transparencies
To print on transparencies, display the [Tray/Output] tab and [Basic] tab. This section
explains the procedure using WordPad on Windows XP as an example.
Note
• The way to display the printer properties dialog box differs according to the application software. Refer to
the manual of your respective application software.
• Printing transparencies continuously may lead to the output transparencies sticking to each other. As a
guide, remove the transparencies from the output tray after about 20 sheets and then fan them to lower
their temperatures.
1. From the [File] menu, select [Print].
2. Select this printer as the printer to be used and click [Preferences].
3. Click the [Tray/Output] tab.
Side to be
printed
2.3 Printing on Transparencies
25