Paper Priority; Tray Priority - Xerox DocuPrint 305 User Manual

[Bypass Feed]
Select this to print on paper loaded in the bypass tray. You can select this only when the
bypass tray (optional) is installed.
Note
• If a computer issues the instruction about paper selection, it overwrites this setting.
Paper Type
Specifies the paper type to be loaded in trays. The default is [Plain] for all trays. The names
specified in [Paper Name] will be displayed for Customs 1 to 5.
Tray 1 to Tray 4
Select from [Plain], [Recycled], [Heavyweight 1], [Heavyweight 2], [Transparency], and
[Custom 1] to [Custom 5].
Tray 1 (Bypass)
Select from [Plain], [Recycled], [Heavyweight 1], [Transparency], and [Custom 1] to
[Custom 5].
Note
• [Tray 1 (Bypass)] will be displayed when the bypass tray (optional) has been installed. If it is displayed,
you cannot specify [Tray 1].

Paper Priority

Specifies the priority of the paper type loaded in the tray specified with the auto tray
selection feature. The names specified in [Paper Name] will be displayed for Customs 1 to
5.
Plain, Recycled, Heavyweight 1, Heavyweight 2, Custom 1 to Custom 5
Select the priority of each paper type from [Not Selected] and [1] to [9]. You can specify the
same priority for different paper types. In this case, the paper tray is selected based on the
settings in [Tray Priority]. If you specify [Not Selected] for a paper type, the tray loaded with
the paper type will be excluded from the targets of auto tray selection. The default is [1] for
plain paper, [2] for recycled paper, and [Not Selected] for the others.
Refer to
• "Automatic Tray Selection" (P. 62)

Tray Priority

Specifies the priority of trays 1 to 4 for auto tray selection when the optional trays are
installed. The bypass tray is excluded from the targets of auto tray selection.
1 to 3
Specify a priority of [1] to [3] for each tray. You cannot set the same tray to different priority
numbers. That means the trays that can be set [2] are other than the tray specified in [1],
and the trays that can be set [3] are other than the trays specified in [1] and [2]. The
remaining trays are set to [4]. The default priority is tray 1 (highest priority) to tray 4 (lowest
priority).
90
4 Settings on the Control Panel