Dodging In Nav Mode - Simrad AP50 Instruction Manual

Hide thumbs Also See for AP50:
Table of Contents

Advertisement

DODGE
T URN
AUTO
Note !
DODGE
T URN
N
350°
CTS
GPS1
DODGE
.023
XTE
NM
NEXT WP
340.
SIMRAD
7
225
°M
BPW
Gyro1
25
DST
NM
20221032B
2. Manually steer the
vessel by wheel:
or
Non-Follow-Up:
or
Follow Up: Both
To return from DODGE mode, press one of the following:
Selects AUTO mode with the last set course.
Selects AUTO mode with the current heading as the set course.
If using Non-Follow-up or Follow-up steering modes while
dodging, "NFU" or "FU" flash.

Dodging in NAV Mode

A quick press on the
dodging.
When in DODGE mode, the course displayed as Course To
Steer (CTS) is the boat's recommended heading. However, the
previous set course is stored by the AP50. When DODGE is
flashing on the display, the AP50 is no longer in control of the
steering and you must either steer the boat manually or take
control using either Non-Follow-up steering or Follow-up
steering. On manual steering, the clutch (or bypass valve) in the
drive unit will be disengaged when dodging. The AP50 will
remain in the DODGE mode until you exit DODGE by a second
press on the
(DODGE/TURN) button or until you select
DODGE
T UR N
another mode.
Perform dodging as follows:
1. Press
(DODGE/TURN) button quickly
D OD G E
T U R N
2. Manually steer the
vessel by wheel:
or
Non-Follow-up:
or
Follow-up: Both
To return from DODGE mode press one of the following:
or
or NFU steering lever.
and course knob.
(DODGE/TURN) button activates
DODGE
TUR N
or
or NFU steering lever.
and course knob.
Operation
35

Advertisement

Table of Contents
loading

Table of Contents