Simrad AP50 Instruction Manual page 92

Simrad AP50 Autopilot
MODEL MOTOR
VOLTS
MLD200 12
HLD350 12
HLD2000L 12
HLD2000D 24
HLD2000LD 24
MSD50 12
Steering Gear Interface: Connects to Quadrant or Tiller.
Note !
1. The motor voltage is stepped down by the junction unit when
2. The specified junction unit is necessary to achieve maximum drive
3. Recommended operational thrust or torque is 70% of the listed
4. Typical average power consumption is 40% of the listed maximum
90
LINEAR DRIVE UNITS
JUNCTION MAX.
UNIT STROKE
mm (in.)
J50 300 (11.8)
J50 200 (7.9)
J50 340 (13.4)
J50 200 (7.9)
J50 340 (13.4)
J50 190 (17.5)
Table 4-3 Linear Drive Units
operating from 24 V or 32 V Mains (except for RPU1 and RPU3).
unit capacity.
value.
value.
PEAK MAX.
THRUST RUDDER
kg (lb.) TORQUE
Nm
(lb./in.) (30% load)
200 490
(440) (4350)
350 610
(770) (5400)
500 1460
(1100) (12850)
1050 1800
(2310) (15900)
1050 3180
(2310) (28000)
60 -
(132)
HARD- PWR. TILLER
OVER CON- ARM
TIME SUMP. mm
sec. (in.)
15 1.5-6 A 263
(10.4)
12 2.5-8 A 175
(6.9)
19 3-10 A 298
(11.7)
11 3-10 A 175
(6.9)
19 3-10 A 298
(11.7)
15 0.8-2 A
20221032B
-