Nav Mode - Simrad AP25 Instruction Manual

Seastate filter
The manual setting determines the number of degrees the vessel
may deviate from the set course before any command is given to
the rudder. The AUTO setting is recommended. The MANUAL
settings may be used to find the optimum combination of course
keeping and low rudder activity in rough but steady sea
conditions.
Reset trip
Same procedure as in STANDBY mode
User setup 2

NAV Mode

20222139A
OFF: Seastate filter is disabled.
AUTO: Automatically reduces rudder activity and
autopilot sensitivity in rough weather by
an adaptive process (default).
MANUAL: Manual yaw band adjust (1-10, 10 ≈ ±6°).
Refer to User setup 2 for STANDBY mode, page
38.
The User setup for NAV mode is similar to the User
setup for AUTO mode. It does not include the
Nav/Wind and the Source select items.
The User setup 2 contains the Set shallow water
alarm and the Contrast setting. Refer to User Set-up
for STANDBY mode.
Operation
43