Controls - Trane Precedent RT-PRC005 User Manual

ReliaTel™ Controlled Units
Zone Sensors are the building
occupant's comfort control devices for
Precedent™ units with the Micro control:
Manual
Changeover —
Heat, Cool or Off
System Switch. Fan
Auto or Off Switch.
One temperature
setpoint lever.
Manual/Automatic Changeover —
Auto, Heat, Cool or Off System
Switch. Fan Auto
or Off Switch. Two
temperature
setpoint levers.
Optional Status
Indication LED
lights, System On,
Heat, Cool, or
Service.
Remote Sensor
— Sensor(s)
available for all
zone sensors to
provide remote
sensing
capabilities.
Integrated
Comfort TM System — Sensor(s)
available with
optional
temperature
adjustment and
override buttons to
provide central
control through a
Trane Integrated
TM
Comfort system.
RT-PRC005-EN
Zone Controls
Programmable Night Setback —
Auto or manual changeover with seven-
day programming. Keyboard selection
of Heat, Cool, Fan, Auto, or On. All
programmable sensors have System
On, Heat, Cool, Service LED/indicators as
standard. Night Setback Sensors have
one (1) Occupied, one (1) Un-occupied,
and two (2) Override programs per day.
Humidity Sensor — Field installed,
wall-mounted
(BAYSENS036) or
duct-mounted
(BAYSENS037)
humidity sensor is
used to control
activation of the
hot gas reheat
dehumidification
option. The
humidity sensor
can be set for
humidity levels
between 40% and 60% relative humidity
adjusting the ReliaTel Options Module.
CO2 Sensing — The CO2 sensor shall
have the ability to to monitor space
occupancy levels within the building by
measuring the
parts per million
of CO2 (Carbon
Dioxide) in the
air. As the CO2
levels increase,
the outside air
damper
modulates to
meet the CO2
space
ventilation
requirements.
The CO2
accessory shall
be available as field installed.
Electromechanically Controlled
Units
Conventional Thermostats are the
building occupant's comfort control
devices for electromechanically
controlled units.
Manual Changeover — One Heat,
One Cool
Thermostat.
Heat, Cool or Off
System Switch.
Fan Auto or On
Switch. Set Point
TM
Dial. Adjustable
Heat Anticipator.
Automatic Changeover — One Heat,
Two Cool Thermostat. Off, Auto System
Switch. Auto/On Fan Switch.
HEAT
50 60 70 80 50 60 70 80
50 60 70 80
FAN
AUTO ON
OFF AUTO
Programmable Electronic Night Setback
Thermostat —
Heating setback
and cooling
setup with 7-day,
5-1-1
programming
capability.
Available in Two
heating/cooling
or one heating/
cooling versions
with automatic changeover.
COOL
TM
49