EE Brightbox User Manual page 81

Your router's PIN
number
PIN Status
device PIN
start PBC
PBC Status
method when making a wireless connection to the router.
This is the PIN number you will enter into the wireless
adapter software when requested in order to establish a
WPS connection using the PIN method.
If you are entering a PIN number supplied by the wireless
adapter into the 'device PIN' field, you can ignore the
router's PIN number.
This field displays the current status of the WPS PIN
method connection.
'Idle' means that the WPS PIN session has not been
activated.
'In Progress – Please wait...' means that the WPS PIN
connection method has been activated and is currently
trying to establish a connection with the wireless adapter.
This will only be visible for 2 minutes.
'Error Detected – Please Try Again' means that the WPS
PIN connection method has not been successful. Try again
or connect using WPS PBC or by manually entering the
wireless password.
'Success – The device is connected to the router' means
that the WPS PIN connection method has been successful
and a wireless connection between the router and the
wireless adapter has been established.
In this field, enter the PIN number supplied by the wireless
adapter and press Connect to begin a WPS PIN connection
session.
Please note that this field will only require a PIN number if
the wireless adapter is initiating the session and supplies a
PIN. This field does not need to be completed if you enter
the PIN number supplied by the router in the wireless
adapter software.
Click this button to begin the WPS Push Button
Configuration (PBC) session from the router. You will have
2 minutes to complete the session by pressing the WPS
PBC button on the wireless adapter or software.
This field displays the current status of the WPS PBC
method connection.
'Idle' means that the WPS PBC session has not been
activated.
'In Progress – Please wait...' means that the WPS PIN
connection method has been activated and is currently
trying to establish a connection with the wireless adapter.
This will be visible for 2 minutes.
'Error Detected – Please Try Again' means that the WPS
PBC connection method has not been successful. Try
again or connect using WPS PBC or manual password
methods.
'Success – The device is connected to the router' means
that the WPS PBC connection method has been
successful and a wireless connection between the router
and the wireless adapter has been established.
EE Bright Box User Manual
81