Connect And Turn On Your Router; Check It Over - EE Brightbox User Manual

2. If you have a telephone cable reconnect it directly to the telephone socket
3. Disconnect the grey broadband cable from the Bright Box.
4. Remove any Ethernet cables currently connected to the red WAN port, reconnect the
Ethernet cables to another available port (LAN1, LAN2 or LAN3)

Connect and turn on your router

Plug the other end of the black Ethernet cable connected to the modem into the red WAN
port on your router:

Check it over

Everything should now look like this:
The power light will go green, the broadband light will go green once you've completed the
next steps.
EE Bright Box User Manual
21