Appendix A: Default Router Settings - EE Brightbox User Manual

APPENDIX A: DEFAULT ROUTER SETTINGS

The following table lists the default settings for the EE Bright Box wireless router. To restore
the router to default settings, see page 177
Section
Router Admin Pages
Broadband Settings
Wireless Settings
Wi-Fi Protected
Setup
USB File Sharing
Advanced Broadband
Settings
ADSL Mode
Setting
URL
Username
Password
Broadband Type
Broadband
Username
Protocol
VPI/VCI
Encapsulation
Internet IP Address
DNS IP Address
MTU
Enable or Disable
Wireless
Wireless Mode
Channel
Wireless Network
Name (SSID)
Broadcast SSID
Security
WPA Mode
Wireless Password
Wi-Fi Protected
Setup (WPS)
Auto Share
Workgroup Name
File Permissions
Security Control
Connection Type
Authentication
Protocol
ADSL Mode
EE Bright Box User Manual
204
Default Value
192.168.1.1
admin
Unique value - see sticker on bottom of
router or ''KEEP MEE' card.
ADSL (ADSL broadband) Fibre/Ethernet
(Fibre broadband)
readytoconnect@fs
PPPoA (ADSL broadband) PPPoE (Fibre
broadband)
0/38
VC MUX
Dynamic
Obtain from ISP
1492
Enable
11b+11g+11n
Auto (Intelligent Wireless)
Unique value - see sticker on bottom of
router or 'KEEP MEE' card.
Enable
WPA
WPA/WPA2 Mixed Mode
Unique value - see sticker on bottom of
router or 'KEEP MEE' card.
Disable
Enable
Workgroup
Read & Write
Disable
Always Connected
CHAP
Automatic