Diffserv Groups; How To Apply Bandwidth Prioritisation For Diffserv Groups - EE Brightbox User Manual

Incoming Port

DIFFSERV GROUPS

The Diffserv Groups page is used to configure the levels of traffic prioritisation for Quality
of Service traffic shaping. Once you have defined the traffic types (or devices) you want to
shape on the traffic mapping page, you need to decide how much bandwidth you will apply
to the prioritisation.
To access the Diffserv Groups page:
1. Login to the router's admin pages.
2. Click on the Advanced Set-Up tab and click Accept on the 'Please proceed with
caution' page.
3. Click on QoS in the left hand navigation menu to expand the quality of service menu
4. Click on Diffserv Groups in the left hand navigation menu:

How to apply bandwidth prioritisation for Diffserv Groups

As you can see from the Diffserv Groups page, there are eight levels of traffic prioritisation
(known as Diffserv Groups):
or TCP/UDP (BOTH) traffic.
Select this option to assign a Quality of Service rule
to traffic from a device connected to the router
either by Ethernet (Ethernet Ports 1-4) or over the
wireless LAN (SSID 1-3).
EE Bright Box User Manual
166