EE Brightbox User Manual page 152

6. Enter a value in the 'name' field for the schedule – this name will appear in the
'Scheduling Rule' dropdown on the Access Control page when you define the access
control rule. In this example we will call the rule 'Block 21-23.59'.
7. Enter a value in the 'comment' field for the schedule. This can be any value and will
appear in the table on the Schedule Rule page. In this example we will call the
comment 'Nine to Midnight'
8. In the 'activate time period' fields you can enter the times you want the schedule rule to
apply. You can use the 'Every Day' week day to apply the schedule on every day of the
week, or specify particular days you want the rule to apply. Please ensure that the start
time is earlier than the end time, and 24 hour clock notation is used (8:30 for 08:30am
or 17:50 for 5:50pm for example). If you want to have the schedule apply for the full day
enter a start time of '0:00' and an end time of '23:59'. In this example we will set the
start time to '21:00' (9pm) and end at 23:59 (midnight).
9. Click Save Settings:
10. The new schedule rule will appear in the Schedule Rule table:
11. Next, click on Access Control in the left hand navigation menu:
EE Bright Box User Manual
152