Advanced Set-Up Tab - EE Brightbox User Manual

> Migration Wizard
Wireless Settings
> Wi-Fi Protected Setup
USB File Sharing

Advanced Set-Up tab

Section
Broadband Settings
> ADSL Mode
> Migration Wizard
Wireless Settings
> Channel and SSID
Broadband Username and Password can be found
here, as well as ISP settings, DNS and MTU settings.
This page contains a wizard that allows you to
change the default router configuration to work on
either EE Fibre broadband or EE ADSL broadband
services.
This page contains basic settings to configure your
wireless network. The wireless mode, channel,
wireless network name (SSID), wireless password,
broadcast SSID, security type and security modes
can be configured here. You can also refresh the
Intelligent Wireless channel on this page.
This page allows you to enable or disable the Wi-Fi
Protected Setup (WPS) capability on the router. This
option is disabled by default. You can also find the
WPS PIN and Push Button Configuration (PBC)
settings here.
This page contains basic settings to configure the
USB File Sharing feature on the Bright Box router.
The Auto Sharing feature is enabled by default. The
Workgroup Name, Security Control and File
Permission settings can be set here.
Description
This page contains more advanced settings for
configuring your EE broadband service. It includes
the settings found in the Basic Set-Up page and
additional settings such as Connection Type, Idle
Time, Authentication Protocols and an option to
manually connect/disconnect your Internet
connection.
This page contains options to manually configure
the ADSL connection mode on your router. By
default this is 'Automatic'. but settings can be
changed in order to assist connection
troubleshooting.
This page contains a wizard that allows you to
change the default router configuration to work on
either EE Fibre broadband or EE ADSL broadband
services.
This page allows you to enable or disabled the
wireless LAN (WLAN) on the Bright Box router. You
can also refresh the Intelligent Wireless channel on
this page.
This advanced page allows you to set the Wireless
Mode (b/g/n, b/g, n only modes), Primary and
Secondary Channels, Wireless Bandwidth (20MHz
and 20/40 MHz modes), create multiple SSID's and
bind SSID's to a virtual LAN (VLAN) to create
isolated wireless networks
EE Bright Box User Manual
34