How To Create A Quality Of Service Traffic Mapping Rule - EE Brightbox User Manual

How to create a Quality of Service Traffic M apping rule
To configure Quality of Service, you must configure the traffic mapping rule for the type of
traffic, or devices on your network you want to prioritise.
To create a Quality of Service traffic mapping rule:
1. Login to the router's admin pages.
2. Click on the Advanced Set-Up tab and click Accept on the 'Please proceed with
caution' page.
3. Click on QoS in the left hand navigation menu to expand the quality of service menu
4. Click on Traffic Mapping in the left hand navigation menu.
5. Click on the Add Traffic Class link:
6. On the Edit Traffic Class page, enter a name for the traffic mapping rule you are
creating – in this example we will call it 'FTP'.
7. Use the 'Traffic Type' dropdown to select either the type of application (Voice, Online
Games, Video), specific applications (Applications), connected devices or computer (MAC
Address, IP Address, Incoming Port) or application ports (TCP/UDP) you want the quality
of service setting to apply to. In this example we are selecting a Traffic Type of
'Applications' and an 'Applications' of 'FTP'. See quality of service traffic type
descriptions on page 165 for a list of other traffic types.
8. Select the Priority you want to give to this traffic type. There are eight priority levels
(Highest, Higher, High, Medium, Normal, Low, Lower and Lowest) to choose from. The
traffic shaping effect of the priority applied to each level will be configured in the
Diffserv Groups page. In this example we will select 'Low':
EE Bright Box User Manual
163