Your Fibre Broadband Is Being Set Up; You Can Now Connect Your Devices; Setting Up A Wired Connection To Your Bright Box - EE Brightbox User Manual

6. Press OK on the warning pop-up. The migration countdown will begin. You can now
close your browser.

Your Fibre broadband is being set up

This will take up to 5 minutes, so relax and let us do the leg work.
Please note that if you're redirected to the 'Nearly there!' holding page in your browser,
you may need to wait a few more minutes for us to set up your router. If after 5 minutes, the
'Nearly there!' text is still visible when you reopen your browser window, reboot your PC and
then reopen the browser window again, you should now be able to view web pages. If this still
doesn't work, you can manually enter your broadband username and password in the router
user interface and make a connection to the Internet (see how to manually update the
broadband username and password on page 52)

You can now connect your devices

You can now connect your devices to your Bright Box router. Choose either wireless or wired
connection and follow the steps on pages 23 and 25

SETTING UP A WIRED CONNECTION TO YOUR BRIGHT BOX

To set up a wired (Ethernet) connection between your computer and the Bright Box Wireless
Router, follow the steps below:
1. For ADSL broadband, plug one end of the black Ethernet cable into any of the four yellow
Ethernet sockets on the back of your Bright Box Wireless Router:
EE Bright Box User Manual
23