EE Brightbox User Manual page 136

You can refresh the NAT mapping table by clicking the refresh button at the bottom of the
page
The table below contains a description of the fields on the NAT mapping page :
Section
Index
Protocol
Local IP
Local port
Pseudo IP
Pseudo Port
Peer IP
Peer Port
Description
This field is the index for the NAT port mapping
entry.
This field is the traffic type for the NAT mapping
entry. This will either be 'TCP' for Transmission
Control Protocol entries or 'UDP' for User Datagram
Protocol entries.
This field is the IP address for the device on your
local network which is associated with the NAT
mapping entry.
This field is the port for the device on your local
network which is associated with the NAT mapping
entry.
This field is the translated IP address for the NAT
mapping entry. This address is usually the WAN IP
address assigned to you Internet connection by your
ISP
This field is the translated port for the NAT mapping
entry and will usually match the local port number.
This field is the IP address of the remote/originating
NAT mapping source on the Internet/WAN.
This field is the port of the remote/originating NAT
EE Bright Box User Manual
136