Back Panel View - EE Brightbox User Manual

Data
Wireless
Intelligent
Wireless/
WPS
Ethernet 1-
4 (ADSL
Broadband)
Ethernet 4
(Fibre
Broadband)

BACK PANEL VIEW

On the back panel of the Bright Box you will find the following ports, sockets and buttons:
username and password have been entered
incorrectly.
Off The router can't detect a broadband signal.
If you are using the EE Fibre broadband service
check that the Ethernet connection between the
WAN port on the Bright Box and LAN1 port on the
Fibre modem is connected and the modem is
powered on.
Flashing
Traffic is being sent or received between the
computer and router, or the router and the
internet
Off For ADSL broadband that means that no data is
currently being sent or received from the router.
If you are using the EE Fibre broadband service,
this light will always be off, and this is normal.
On The wireless access point is enabled.
Flashing Data is being sent via the wireless link.
Off Wireless has been disabled.
On A successful WPS connection has been made.
Fast The WPS button has been pressed - the router is
Flashing capable of setting up a WPS connection.
Slow The router is searching for a new wireless
Flashing channel as part of the Intelligent wireless
process.
Off Default behaviour – WPS or Intelligent wireless
aren't currently in progress.
On Ethernet connection has been established with
the indicated port.
Flashing
The Ethernet connection is sending/receiving
data.
Off There is no Ethernet connection on the port.
On A connection has been established between the
Bright Box and the Fibre modem.
Flashing Data is being sent between the Bright Box and
the Fibre modem.
Off
The Ethernet connection between the Bright Box
and the Fibre modem has been disconnected or
the modem is powered off.
Check that the Ethernet connection between the
WAN port on the Bright Box and LAN1 port on the
Fibre modem is connected and the modem is
powered on.
EE Bright Box User Manual
11