Baby Lock Crown Jewel - Baby Lock Pro-Stitcher BLPS Instruction And Reference Manual

Installation

Baby Lock Crown Jewel

Tools Required
Power drill
4mm Allen wrench
5mm Allen wrench
Slotted screwdriver (one large and one small)
Phillips screwdriver (one large and one small)
Knife and/or scissors
X-Rack Installation
NOTE: Owners of the Majestic Frame should also
have purchased a Pro-Stitcher shim kit (Item No.
(BLPS-GMFKIT) for the Majestic Frame. Please fol-
low instructions included in that kit for shimming
the track prior to installing the X-rack.
1.
Remove the blue fl exirack (Page 3, A) and the
Pro-Stitcher carriage (E) from the box. Cut the cable
ties from the front of the carriage (Figure 1).
2.
Place the Pro-Stitcher carriage on the frame with
the white X-axis gear toward the front of the table.
The white X-axis gear drives the carriage left/right
across the table.
3.
Starting at one end of the table, begin mount-
ing the blue fl exirack to the table surface. Using the
X-axis engagement lever, drop the white X-axis gear
so it engages with the blue fl exirack. With the blue
fl exirack in position under the white gear, begin
peeling the pink protective layer from the back side
of the blue fl exirack and pressing down on the blue
fl exirack to stick it to the table surface (Figure 2).
Page 4
Figure 1
Figure 2