Pause Record; Channel Locks; Done - Baby Lock Pro-Stitcher BLPS Instruction And Reference Manual

Pause Record

When finished, or if the user wishes to add a "Jump"
to a recorded pattern, press "Pause Record"
(Figure 63). Move the machine to a new position
and press "Resume Record," followed by the "Motors
Enabled" button to begin recording again (which will
add a dashed line representing a Jump) if desired.
Press the "Save" button if the user is finished and
wishes to save the pattern. Browse to the desired
folder on the USB flash drive and enter a name in the
"Save" screen (Figure 64).

Channel Locks

The "Channel Lock" buttons are available in the
"Freehand" screen to allow the user to lock the Pro-
Stitcher horizontally or vertically while recording
the motion of the quilting machine.

Done

When finished, press the "Done" button. If the user
has not saved the pattern, a dialog box will pop up
to remind the user to save the pattern. If the user
decides to save the pattern, press the "Accept" button
and save the pattern as described previously. Oth-
erwise, press the "Back" button and the user will be
returned to the "Quilt" menu screen.
Page 56
Figure 63
Figure 64