Baby Lock Pro-Stitcher BLPS Instruction And Reference Manual page 26

1. Enter the value of the desired pattern height by
tapping the number box under "Height" and entering
the desired height in the pop-up number pad.
2. Press the "Keep Aspect Height" button and the
Pro-Stitcher will calculate the width required to
maintain the current aspect ratio based upon the
new height entered (Figure 14).
3. Verify that the pattern is now the correct size by
looking at the top of the screen. The "H" values will
now match the height value that was entered and the
"W" value is a width that keeps the design propor-
tionate to the height.
4. The same can be done with the width by entering
a desired width and using the "Keep Aspect Ratio
Width" button (Figure 15).
As an alternative, the quilting machine may be used
to measure a desired width or height:
1. Move the quilting machine to the bottom of the
area being measured (if measuring height) or left-
hand side (if measuring width).
2. Press the "Reset Home" button to zero out the
measurements.
3. Move the machine to the top (if measuring height)
or right (if measuring width) of the area being meas-
ured.
4. Press the "Keep Aspect Ratio Height" or "Keep
Aspect Ratio Width" buttons.
Page 24
Press the "Done" button to save the changes and exit
back to the "Quilt" menu screen.
Figure 14
Figure 15