Repeat Pattern - Baby Lock Pro-Stitcher BLPS Instruction And Reference Manual

The Cropping "L" and "7"
Think of the "Bottom Left" tool as an uppercase
letter "L". When you slide the "L" along the de-
sign, everything inside the "L" is saved. Every-
thing to the left of and below the "L" goes away.
Think of the "Top Right" tool as the number "7".
When you slide the "7" along the design, every-
thing inside the "7" is saved. Everything to the
right of and above the "7" goes away.
You can visualize this by mak-
ing an "L" with your left hand
and a "7" with your right hand
and move your hands together
and apart. The area between
your hands is saved.

Repeat Pattern

The "Repeat Pattern" button will give the user three
repeat options (Figure 23).
The "Repeat" button allows the user to specify the
number of repeats horizontally and vertically without
changing the size of the original pattern.
1. Enter the number of repeats desired in the "Repeat
# Height" and/or "Repeat # Width" boxes by tapping
on the appropriate box and entering the number of
repeats in the pop-up number pad (Figure 24).
2. If a gap is desired between each pattern or each
row of patterns, enter a value in the "Distance Apart"
boxes (in inches) (Figure 25).
Figure 23
Figure 24
Figure 25
Page 29