Baby Lock Pro-Stitcher BLPS Instruction And Reference Manual page 37

Drag From Here
3. The third way to position a pattern on the quilt is
to use the "Drag From Here" function. This function
allows the user to position the pattern based upon
any point within the pattern block.
1. If the crosshairs are not visible in the pattern win-
dow, press the "Reset Home" button at the top. This
will position the crosshairs at the x=0, y=0 location
of the pattern, which is usually within the extents of
the pattern for most patterns.
2. Watch the screen while moving the machine and
position the crosshairs on the point that is to be the
reference for positioning (i.e., a corner of the pat-
tern block, or a specific point on the pattern that
needs to match up with a certain spot on the quilt,
such as the tip of a leaf shown in Figure 34). Use the
"Pan/Zoom" feature to reposition the pattern on the
screen, if needed.
3. Press the "Drag From Here" button. The icon will
change to "Move Pattern" and turn green
(Figure 34).
4. Focus now on the quilt and move the machine to
the point where the needle is at the position on the
quilt that is to be matched with the point in the pat-
tern that was chosen.
5. Press the "Move Pattern" button to place the pat-
tern in the location that has been chosen.
6. Move the machine around and watch the cross-
hairs (which represent the needle on the machine) to
verify the pattern is now positioned properly on the
quilt.
Press the "Done" button to return to the "Quilt"
menu screen.
Figure 34
Page 35