Regulatory Instructions For Use; Canada; Fcc Notification - Avaya IP Office Essential Edition PARTNER Version Reference Manual

6.3 Regulatory Instructions for Use

6.3.1 Canada

This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by
the registration number. The abbreviation, IC, before the registration number signifies that registration was performed
based on a Declaration of Conformity indicating that Industry Canada technical specifications were met.
It does not imply that Industry Canada approved the equipment.
''NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is 1. The REN assigned to each terminal
equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.
The termination on an interface may consist of any combination of devices subject only to the requirement that the sum
of the Ringer Equivalence Numbers of all the devices does not exceed five.''

6.3.2 FCC Notification

This equipment is registered with the ACTA (Administrative Council for Terminal Attachments) in accordance with FCC
Part 68 of its rules. In compliance with those rules, you are advised of the following:
· Means of Connection
Connection of this equipment to the telephone network shall be through a standard network interface jack.
Connection to 1.544-MBps digital facilities must be through a USOC RJ48C. Connection to the Analog Trunk
facilities must be through a USOC RJ45S.
· Notification to the Telephone Companies
Before connecting this equipment, you or your equipment supplier must notify your local telephone company's
business office of the telephone number or numbers you will be using with this equipment.
· The facility interface codes (FIC) for 1.544-MBps digital connection are 04DU9.BN, 04DU9.DN, 04DU9.IKN, 04DU9.
ISN.
· The facility interface code (FIC) for analog trunk connection are OL13A, OL13B, OL13C, 02AC2, 02LA2, 02LB2,
02LC2, 02LR2, 02LS2.
· The facility interface code (FIC) for analog trunk connection are OL13A, OL13B, OL13C, 02AC2, 02GS2, 02LA2,
02LB2, 02LC2, 02LR2, 02LF2.
· The Service Order Code (SOC) for 1.544-MBps digital connection is 6.0Y.
· The Service Order Code (SOC) for analog trunk connection is 9.0Y.
· Disconnection
You must also notify your local telephone company if and when this equipment is permanently disconnected from
the line or lines.
· Hearing Aid Compatibility
The custom telephone sets for this system are compatible with inductively coupled hearing aids as prescribed by
the FCC.
Ringer Equivalence Number (REN). The REN is used to determine the number of devices that may be connected to the
telephone line. Excessive RENs on the line may result in the devices not ringing in response to an incoming call. In most,
but not all, areas, the sum of the RENs should not exceed five. To be certain of the number of devices that may be
connected to the line, as determined by the total RENs, contact the local telephone company to determine the maximum
REN for the calling area.
PARTNER® Version, Installation and Reference Manual
IP Office Essential Edition
Appendices: Safety Statements
Page 111
- Issue 1a (30 January 2010)