Creating A New Cue Point Using The Cue List Screen - Fostex PD-6 Operation Manual

• Editing time data
To edit time data, select "Position" using the [SEL] dial and press the [ENTER] key.
The subframe value of the current time data flashes, showing that you can now edit
it.
Select the edit point using the [
[SEL] dial, and confirm the setting by pressing the [ENTER] key.
<Note>
Pressing the [CLEAR] key resets the time value to zero (00h 00m 00s 00f 00sf).
• Deleting a cue point
To delete an unnecessary cue point, select "Delete" using the [SEL] dial and press the
[ENTER] key ("Sure?" flashes).
Press the [ENTER] key to delete the cue point from the list.
<Note>
After deleting a cue point, the label column of the cue point becomes empty while
the time value column shows "—h—m—s—f—".

Creating a new cue point using the cue list screen

Using the CUE LIST screen, you can create a new cue point.
Select a desired cue number which does not hold data.
By pressing the [ENTER] key, time data of the current recorder position is
stored as the cue point.
In the example below, Cue 5 is created when the current recorder position is
"01h58m20s**f**sf" (LTC time).
PD-6 DVD Location Recorder (Chapter 5: Recording/playback)
SKIP/CURSOR ] key, edit the value using the
75