Auto Cue Mode On/Off Setting (Auto Cue); Pause Cancel Time Setting (Pause Time) - Fostex PD-6 Operation Manual

Auto cue mode on/off setting (Auto cue)

The "Auto cue" menu selects whether or not recording a cue point at the
record start position automatically when making recording to a "Tape" mode
disk.
With the "Auto cue" menu, you can select between "On" and "Off".
<Note>
The auto cue function can be active only with a "Tape" mode disk. It is not active
with a "Normal" mode disk.
<Note>
You can manually create a cue point at a desired position by using the [CUE] key
(with either of a "Normal" or "Tape" mode disk).
You can edit created cue points or give labels to them.
Option
Off (default)
On

Pause cancel time setting (Pause time)

The "Pause time" menu sets the pause cancel time. After the pause cancel
time has passed since the recorder entered the pause mode, the recorder
automatically cancels the pause mode and stops.
With the "Pause time" menu, you can set the pause cancel time between 0
and 9 seconds (or infinity).
Option
0.1 to 9.9 minutes
Infinity
<Note>
To save battery power, we recommend to set the time as short as possible.
PD-6 DVD Location Recorder (Chapter 7: Setup mode)
A cue point is not automatically created at the record start position.
A cue point is automatically created at the record start position.
You can set the time in 0.1 minute steps (the default setting is 3 seconds).
The infinity setting maintains the pause mode until the "STOP" key is pressed.
Comment
Comment
flashing
flashing
95